Fujitsu Printer code Errors and Messages

While performing various tasks, getting Fujitsu Printer Code Errors and Messages is evident if something is wrong with the printer. You can get to see different error codes from other problems on your printer. So, if you want to fix these issues quickly, it is necessary to know what they actually mean. Hence, in the following content, you are going to learn about some major Fujitsu error codes and messages and methods to solve them.

Error Code- U6:B4

Cause - The print cartridge is not installed in the printer.

Solution

When facing this problem, you have to check if the cartridge is installed properly or installed in the printer. If you see the cartridge missing, you need to set it in the printer and make sure you are using the appropriate cartridge for the printer.

Error Code- U4:41

Cause - This error code tells us that the printer cover is open or not fully closed.

Solution

The simple solution to resolve this issue is to check whether the printer cover is open or not. If it is open, you have to close it properly.

Error Codes- L0:11, L1:12, L2:13, L3:14, L4:15, L5:17, L6:1B, L6:1C.

Cause -The printer is facing some issues with its censors.

Solution

If you see any of these error messages on the printer's screen, you have to check the printer's sensors. Additionally, with this issue in the printer, you have first to turn off your printer and, after that, turn it on. Although if your printer still has problems and shows error codes, then it is best to take the help of a professional.

Error Code- J1:50, J1:51, J1:52, J1:31, J1:32, J1:34, J1:35, J1:3A, J1:3B, J1:3C, J1:3D, J1:3E

Causes - This error code means the printer has a paper jam.

Solution

• First, you need to open the cover of the printer to check the paper tray.
• Now, inspect if the tray check in the paper is appropriately kept in the paper tray. Also, check if they are not folded/crumpled from any side.
• You need to see if there is no debris in the paper tray.
• The papers you are using are the right size for the printer.
• Make sure the papers you are using are not very old and are in good condition.

Error Code- C0:E5, C0:E6

Causes - These codes are related to printer memory issues.

Solution

To solve this issue in your printer, you must inspect the memory of your printer's front and back. The best way to resolve this issue is to turn off the printer and restart it. However, if the problem still persists on your printer, seek professional help to fix the issue.

Error Code- no code

Causes

• If you do not see any code error on the printer, but still your printer is not able to print any document, then its causes can be as follows-
• The printer scanned fewer sheets than configured.
• The printer is not in document-counting mode.
• The scanning process of the printer has been stopped.
• There are some documents in the hopper after scanning some specific number of papers.

Solutions

• You need to stop the document count mode.
• You have to wait for configured sheets to be scanned.
• Check if the process of scanning is stopped and start it if you find it in the stop condition.
• Check the hopper or keep more documents in the hopper.

Error Codes- J8:01, J8:02, J8:03, J8:04, J8:05, J8:06, J8:07

Causes

These errors indicate pick sensor is dirty, the skew sensor is dirty, Feed Top sensor dirty, the Read Top censor dirty, IMP Top censor dirty, exit sensor dirty, and jam sensor dirty, respectively.

Solution

If you see any of these error codes on your printer, then you have to clean the scanner of the printer and then restart it.