How to Add/Install Lexmark Printer to Mac?

If you are looking for the Lexmark printer installation procedure, it contains several steps and methods. Moreover, to complete the setup, you will need to learn to download the driver as well. Despite the fact that Lexmark printers are simple to download and use, the procedure to install the drivers on Mac can be tricky. So, go through the guide and get proper instructions. 

What To Do Before Installing Lexmark Printer?
 

The instructions for installing your local (USB) or network-connected Lexmark printer on your Mac operating system are provided in this article.
 

Depending on which of the following Lexmark print driver or software sources you use, installation guidelines may vary:

• Installation CD for: OS X 10.5 – 10.7
• Web-download driver for OS X 10.4 or later

Note: Be sure to choose your installation route based on the type of driver and compatibility. For information on what operating systems are compatible with your printer, check the manual. Users of Mac OS 10.6x and earlier should refer to Print & Fax, Print & Scan, and Printers and Scanners in the instructions below. Users of Mac OS X 10.7 and after should refer to Print & Scan and Printers and Scanners, respectively.

How to Install Lexmark on Your Mac Device Using CD?

You can use these steps for Mac OS X 10.5 – X 10.7 version to install the setup. 

• First, load the installation disc into the CD drive.
• Then, double-click the Series option.
• After that, tap the Installer icon to begin the installation.
• Now, perform the steps down on the screen.
• Now, Lexmark Setup Assistant will display a Printer Setup screen.

The process is done using a CD to set up your print system within a few minutes. 

How to Install Lexmark on Your Mac Using Web Package?

If you have decided to use the web package, there are two methods to choose from. One of them is a USB connection, and the other one is an Ethernet connection. In addition, you can use these steps for Mac OS X 10.4 or later for any web driver downloaded from the official website. 

Method 1: Use Local Connection (USB)

You can install the setup using the USB cord with these instructions.

• In the first step, locate and run the Uninstaller application.
• Then, you need to delete any previous driver version.
• Next, you will need to open the Finder app.
• After that, navigate to the Mac HD section.
• Now, go to the Application folder.
• Then, navigate to the Lexmark folder.
• In the next step, double-click the Uninstall option.
• Download the latest driver version from the official website.
• Choose your model after that.
• Select the OS version to download the correct driver.
• In the next step, double-tap the Install button.
• Follow the steps shown on your screen.
• The Lexmark Setup Assistant will show the Printer Setup screen.

Method 2: Use Ethernet Cable or Wireless Network

Check to see that the printer is ready and turned on. Also, verify that your computer is connected to the network. Skip to Step 3 if it is already connected to the Internet via Ethernet or wirelessly.

• First, choose a method for the wireless network connection.
• To use the default installation method, double-tap on the Install icon.
• Then, follow the steps on the screen for the network connection type.
• To use Wi-Fi Protected Setup, activate the WPS push button.
      a. Click on Setup and tap the Network Setup option.
      b. Then, click on Wireless Networking.
      c. After that, tap on Wi-Fi Protected Setup and click PBC
      d. Now, go to the router and press the WPS button.
      e. Next, wait for the configuration to finish.
• To use Ethernet or Wireless Setup, get the IP address.
• Thereafter, go to the Settings option and click on Network/ Ports.
• Next, navigate to the Wireless option to set the security settings.
• Get the IP address of your printing system.
• Now, you will need to add the print queue.
      a. Open the Apple menu, and navigate to one of the following: 
      b. System Preferences, Print & Scan or System Preferences, or Print & Fax.
      c. Tap the [+] icon and then press the Default tab.
• Go to the Default tab, and choose your model from the list. 
• The system will automatically look for a compatible driver.
• After that, you need to click the Add button.
• Now, you can verify the connection using these:
      a. Go to the System Preferences option.
      b. Then, click on Print and Fax. 

Note: Choose the print driver manually from the Print Using drop-down menu if it cannot be identified. Click on the Other option and look for the PPD file for your model there.

How to Install Lexmark Printer Driver Through Software Update?

Here, we will use the USB connection to complete the installation. 

• First, turn on your Lexmark device.
• Then, use the USB Cable to connect it to the PC.
• If there isn't an already installed printer found:
      a. A dialogue box with “Would you like to download and install software for <Lexmark Model >?” will appear.
      b. After that, you will need to tap the Install button.
• Check the connection in the next step.
• Go to the System Preferences option.
• Then, you have to tap on the Print and Scan button.
• You can also choose to navigate to System Preferences.
• Then, open the Print and Fax section.

Note: You can use these steps for Mac OS X 10.6 or later only.

How to Update Lexmark Printer Driver on Mac Automatically?

You can use these instructions to download the driver for all types of Mac OS. 

• Go to the Apple Menu in the first step.
• Then, you need to select the Apple icon.
• Next, you will need to choose the product update.
• After that, the Utility Program will search for the servers.

Read Also:- How to Troubleshoot Lexmark Printer Offline (Windows/Mac)?

• Now, go to the product update list on your Mac.
• Thereafter, choose the drivers you need to update.
• Click the introduce button after that.
• Now, the updated version will be downloaded to your Mac.
• Once the driver download is complete, you will see a driver bundle container.
• If there is no Utility Program, go to the official website.
• Now, scan for the driver, and the updated version will appear.
• A driver package will pop up on the screen.
• Once driver installation is complete, you can set up the device.
• Go to the settings and set up your print system as the default one.

All of these methods will help you set up your Lexmark printer using a USB or Wireless Connection. In case you encounter any error codes or messages during the setup, connect with us at Printer Tales. You can call us at +1-877-469-0297/ +44-800-054-8150 or drop an email at info@printertales.com. Our printer experts are available 24/7 to offer assistance.