Brother MFC-J4335DW Wireless Setup | Printer Tales

Performing a brand-new Brother MFC-J4335DW printer setup is always easier said than done, especially if you are a novice. During the printer setup, a large number of problems like compatibility issues, firmware problems, incorrect configuration, and more can prevent the process. 

If you are also looking forward to setting up the Brother MFC-J4335DW printer wirelessly, then it is necessary to keep these points in mind. Plus, knowing about the multiple setup methods could also be advantageous. Thus, we will share the three best setup guides to complete the process with ease. 

Method 1: Using the WPS Method

You can use the follow-up WPS method to complete the wireless connection of the Brother printer quickly. 

    1.  Move to your Brother MFC-J4335DW printer control panel and press the Settings button. 

       2. Then, push the down arrow button to select the Network option and then press OK. 

      3.  Press the OK button once again to choose WLAN (Wi-Fi). 

     4.  Next, you need to scroll down to select the WPS/Push button option. 

       5.  Afterward, go to your wireless router, then push and hold the WPS button for three seconds. 

       6. If your printer has a display panel, choose Connect Wi-Fi Device (WPS) and press OK. 

      7.  Now, head back to your printer and press the right arrow button, and it will start connecting. 

     8.  When you see the Connected screen, press the right arrow button. 

      9. Finally, ensure that your printer wireless setup process is successful or not. 

Method 2: Performing Wireless Setup

Here are the steps you can try if you want to perform Brother printer wireless setup. 

     1.  Initially, press the Settings button on the Brother printer control panel.

     2. Now, scroll down to choose the Network option and then select OK. 

       3. Choose WLAN (Wi-Fi) and push the OK button. 

      4.  Next, you need to press OK for the “Find Wi-Fi Network” option to start searching for all the nearby networks within its range. 

      5. Select the correct Wi-Fi network name and press OK. 

      6.  In addition, select the OK option after entering the correct password for your network connection. 

      7.  You are required to press the right arrow button once the connection process is successful. 

      8. At last, try to print a test copy to inspect if your printer is functioning perfectly. 

Also Read:- How to do Brother Printer Wi-Fi Setup?

Method 3: Via Wi-Fi Direct 

The Wi-Fi Direct option is one of the methods to connect your Brother printer to Wi-Fi effortlessly. 

      1.  At the beginning, you are required to go to the printer’s control panel and then press the Settings button. 

     2.  Next, scroll down to select the Network option and then press OK.

     3. After that, choose Wi-Fi Direct and then select OK. 

     4.  Choose the OK option once again to choose Manual; the connection process will initiate after that. 

     5. Move to your mobile phone and go to the Wi-Fi Settings page. 

     6. Now, you are required to choose the network name that starts with DIRECT and is followed by the printer model number. 

      7.  Use the password displayed on your printer screen, enter it, and then tap Connect. 

       8. Furthermore, you can go to the Brother Connect App to complete the setup process of your machine. 

Final Words

We hope your Brother MFC-J433DW printer setup process is successful after using these well-tailored methods. During the setup, ensure that your printer, computer/mobile, and router are within the same range to make things easier. In addition, make sure to follow all the steps correctly. However, If you still have any doubts or are facing issues, then make sure to get further help.