3 Most Common Ricoh Printer Error Codes (With Solutions)

If you’re here, it only means that you have a Ricoh printer at home or office. Though Ricoh is one of the best printer manufacturers around the world, its printers also show error codes at times. If your Ricoh printer also shows codes, there are high chances that you might have had been through one of these three errors.

In the sections ahead, we’ll discuss about the three most common Ricoh printer error codes with their simple solutions. Without further ado, let’s begin.

Ricoh Printer Error Code 91

If you have encountered the printer code 91, don’t worry. It is the most common error that you will encounter in the Ricoh printer. The luckiest thing is you can easily terminate the error. Let’s dig out the reasons behind this error code first.

What Causes Error Code 91?

There can be many reasons behind a printer error code. And figuring all of them out is not an easy task. So, here we have mentioned the causes to find the issue with your printer easily. The error code 91 in the Ricoh printer occurs due to the corrupted data. When this corrupted data is sent to the printer as directions for a print job, your printer displays an error. However, there is nothing to worry about as we have brought up the solution.

Fix Error Code 91

In order to fix this issue, it would be best to stop the printing job due to which this error occurred. After cancelling the printing tasks, you need to turn off the printer. Then, make sure to unplug the power cable from the printer. And let the printer stay in the same state for at least a minute. The neutral state of the printer will allow it to settle the internal issues. Now, your printer will be able to clear the issues for that specific task. Once a minute has gone by, you can plug the power cable back into the printer. After that, start to print the same task again. It is pretty sure that the error must be removed by now. If the error exceeds further, contact customer service.

Ricoh Printer Error Code J001

The error codes are normal to occur when you use your printer for a long time without servicing it. An error code carries several reasons with it. Your printing jobs might be stuck due to the most common problem of all. So, before you predict the wrong assumption, here are the causes and solutions.

What Causes Error Code J001?

The error code J001 occurs due to the poor maintenance of the printer. A machine requires constant care and service in order to print smoothly. Maintenance is necessary whether you are working with Ricoh or any other printer. Even if you do not use your printer often, make sure to clean it thoroughly and check if everything is running properly.

Fix Error Code J001

If you need to resolve this issue, you will have to perform some basic maintenance. If this is your first-time performing maintenance on your printer, turn off the printing device. And make sure to unplug the power cord. Now, open up all the compartments of your printer. Use the flashlight to take a closer look inside the printer. Once the compartment is open, clean out all the debris, like the buildup of dust or lint or torn paper. After you are done with the maintenance, you can close all the panels back. And plug the power cord back into your printer and turn it on. After cleaning your printer and setting it up properly, try to print a test page. Check if the test print still displays the J001 error on your printer.

What if Error Still Displays?

If the error codes still exist in your printer, it is probably because the paper has become soiled. It usually happens because the ink tends to drop and dry upon the paper. It causes the paper to access the roller poorly, and error J001 appears on the printer. It would be best to clean the roller with cotton cloth with some rubbing alcohol.

Ricoh Printer Error Code SC121

The error code SC121 error code might appear as SC121 - 00. So, regardless of which error code you encounter in one of these, the reason will be the same. Before getting right on to the solution, make sure to get the reasons behind the error.

What Causes Error Code SC121?

The causes are always countless behind an error code. Sometimes the error codes persist further even if you have tried all the solutions. It happens when you can’t figure out the exact reason for the error code occurrence. Although, the primary reason behind the error code SC121 is an issue with the scanner. The issue can occur in the scanner unit or multifunctional device. And it happens because the position sensor is unable to power up. It prevents the scanner from moving as required.

Fix Error Code SC121

To fix the Ricoh error code SC121, you can try a couple of things. Firstly, you can try to cover the firmware/ software base. It is because the printer may need a firmware update to run as per design. Secondly, you will need to download the latest version of the firmware online. And make sure that the firmware should be for that particular printer model and install it.

What if Error Still Displays?

If the error code still displays on your printer, it simply means that the scanner sensor or scanner motor is defective. In order to fix the issue, you will be required to get access to these components. Also, it can be a challenging task to attempt. It would be best for you to contact a reliable repair firm that can offer the best customer support. And if your printer is still in warranty, then well and good.