How to Fix Canon Printer Error Code B200? [5 Best Methods]

The most common causes behind any printer error are either hardware or driver/firmware issues. The first thing you should check is if there is any hardware malfunction or a troubled print head that was not properly placed. If you need a reason behind the Canon printer error B200, you must know there are no definite causes. The B200 error code will appear when you try to print a document. Also, the printer light may sometimes glow orange when an error occurs. 

Causes of the Error Code B200 in the Canon Printer

The following can be easily specified as the primary causes of the B200 error:

• Firmware Issues: If the firmware in your system is outdated or corrupt, it will not be able to recognize any hardware part.
• Clogged Printer Nozzles: If any of the nozzles are clogged, the printer won't print, and this hardware issue will flash error codes or messages.
• Improper Cartridge Installation: If any of the cartridges are improperly seated, you will face issues. It is because the printer is unable to communicate with that cartridge.
• Faulty Print Head: If the print head is malfunctioning, clogged with dry ink, or unable to return to its original position, a technical issue will occur.

Regardless, these issues can be resolved in no time. Try to follow through with the instructions listed below and get your problem fixed. 

Method 1: Open the Cover and Restart the Printer

The B200 error may be the outcome of a technical glitch, as the printer is unable to communicate with the hardware. In this case, you can try to power up the print system without its cover. But first, you need to check if the printer is working fine using a USB connection.

• Turn off the Canon printer and open the print head bay as if you were replacing cartridges.
• There is no need to close the cover or remove the cartridges.
• Turn on the print system and wait until the cartridge moves to the left.
• Then, close the print head cover and leave the device powered on.
      a. Make sure to do it before the cartridge reaches the corner.
• Now, check if the problem has been fixed.
• If not, try to perform the above steps again. Here, use the scanner or copier on the printer (without printing) and see if it fixes the issue.
• For a wireless network, try to set the printer near the router. Now, verify if the code still appears.
• Check if the problem is caused by the lost signal between the printer and router.
• If it is, you can use a Wi-Fi extension or place the devices close to one another.

Method 2: Cold Reset Your Printer

The B200 error occurs when the static current inside the printer stops it from locating the hardware. In this case, you should perform the cold reset procedure to fix the issue.

• Turn off the machine and remove the power cord.
• Then, wait about five minutes, and reconnect the power cable.
• After that, turn it on to see if the status code has been resolved.
• If not, switch off the print system and disconnect the power cord.
• Press and hold the Power button for the next 30 seconds.
• Now, connect the power cord back while holding the power button.
• Also, hold the Power button for an extra 30 seconds.
• Press and hold the Feed button while holding the Power button.
• Then, again you have to wait for 30 seconds.
• After that, release the Feed and Power buttons.
• Print a test document to see if everything is working.

Method 3: Uninstall & Install the Driver

A faulty driver on your PC may cause a communication glitch between the printer and the system. Here, reinstalling the printer driver on your PC may resolve the situation.

• First, download the latest driver and software version from the official website.
• Next, right-click on Windows and tap on the Apps & Features option.
• Now, open the Canon printer settings and choose Uninstall.
• After that, select "Confirm" and remove the printer application.
• In the next step, follow the instructions on-screen and remove the software.
• Once done, restart the PC and choose Windows from the menu.
• Go to the Settings section and click on the Bluetooth & Devices tab.
• Open Printers & Scanners in the right pane.
• After that, choose the troubled printer.
• To delete the Canon printer, click Remove in the top right corner.
• Thereafter, you have to click Remove again.
• Tap the Back button and navigate to Related Settings.
• Next, you have to open the Print Server Properties option.
• Now, navigate to the Drivers menu and choose the faulty driver.
• Tap Remove and choose Remove Driver and Remove Driver Package.
• Right-click Windows and select "Open Device Manager" when prompted.
• Tap on View and choose Show Hidden Devices.
• Open Printers and right-click the troubled device.
• Choose Uninstall Device and check the Attempt to Remove the Driver for This Device option.
• Here, click Uninstall, and restart your PC and printer.
• Reinstall the driver and software as an administrator, then restart.
• Thereafter, verify that the issue has been resolved.
• In that case, power off your device and let it rest for five minutes.
• Try to print again while the printer is still off.
• Once the “Printer is Offline” prompt appears, click on Resume.
• Lastly, turn the print system online and start printing.

Method 4: Update the Firmware

An outdated firmware may sometimes create technical glitches like B200 errors. It can Interrupt communication with the PC due to OS compatibility issues. Here, updating the firmware to the most recent version might fix the case.

• Turn off the printer and remove the power cord.
• Tap and hold the Power button for 10 seconds.
• Then, you need to reconnect the power cable.
• Now, go to the Menu and open the Setup section.
• Verify the Estimated Ink Levels now.
• Make sure the cartridges don’t display a yellow triangle.
• If it does, you need to refill or replace the cartridges.
• Tap the Back button and open Setup.

Read More:- Canon Printer Shows Offline? Here’s How to Fix it!

• In the next step, click on Device Settings.
• Thereafter, scroll down and keep the printer online.
• Now, click on Firmware Update.
• If a firmware update is prompted, complete the installation.
• In the end, restart the printer from the Control Panel.

Method 5: Check the Print Nozzle 

The B200 error can also be caused due to the blocked nozzles. Sometimes, it’s just a false error displayed on the LCD that one or more of its nozzles are blocked. In this case, the Nozzle Check Pattern from the Maintenance menu can fix the issue. 

• Start by powering off the printer and unplugging the power cord.
• Then, leave it for 5 to 7 minutes and plug the power cable back.
• Thereafter, open the Print Head Bay cover and turn on the printer.
• When prompted, “the cover is open,” tap the Menu option.
• In the next step, click on the Maintenance tab.
• After that, choose the Print Nozzle Check Pattern option.
• Now, print a sheet to check if everything is processing properly.
• If not, switch off the print system and open the Printer Properties.
• Go to the Devices and Printers menu on your PC.
• Now open the Maintenance tab and click on Nozzle Cleaning.
• Open the print head bay and power up the print system.
      a. Do not start the cleaning process.
• Once the print carriage moves to the left-hand side and passes halfway, close the print head bay. Make sure it does not reach the end.
• Next, the printer screen will display Canon.
• Here, tap the Start Cleaning button on your PC and wait until the cleaning cycle finishes.

These are the basic and reliable methods to resolve the Canon printer error code B200. However, if you are still struggling with this error, connect with Printer Tales experts. Here, you will get professional assistance to fix any printer-related issues. Call us at +1-877-469-0297 or +44-800-054-8150 or drop an email at info@printertales.com.