How to Fix Epson ET-2760 Not Printing Color Issue?
Epson printers are known for their print quality, versatility, and low ink rates. But what happens when the Epson printer suddenly stops printing color prints? What would happen without the color? All things will mean nothing if the printer stops printing in color for some reason.
To answer all your questions and how you can solve this issue, we have discussed a few methods below that will help you fix Epson ET- 2760, not printing color. But, first, let us talk about the causes that can likely cause Epson ET- 2760 not to print color.
Causes Behind Epson ET-2760 Not Printing Color
Here are some of the reasons that are causing the Espon ET-2760 printer not printing the color issue:
- Dust build-up inside the printer- The accumulated dust inside the printer is one of the reasons behind the Epson printer not printing color. That is why it is always recommended that you keep your printer clean.
- Nozzles are blocked- Sometimes, when you run more than three cycles of print cleaning at a single time, it builds up ink in the nozzles.
- Ink cartridge is full- Filling the ink cartridge with the collected dried ink is another common issue. Sometimes, it gets difficult to remove the collected dried ink.
- The printer is not regularly used- When you use the printer on a regular base, it will help you keep away the clogging issues. So, there is a possibility that if you are not using your printer regularly, it can collect dust and negative air pressure.
Methods To Fix Epson ET-2760 Not Printing Color
You can apply the following methods to make sure that your printer prints color. Here are some of the effective methods you can follow:
Method 1- Nozzle Check
The steps to follow in this method are:
- Step 1: Navigate to the maintenance using the arrow button.
- Step 2: Click the OK button.
- Step 3: Next, select Nozzle Check and press the OK button.
- Step 4: When the printer displays load letter/A4 size plain paper in the rear paper feed to start printing, click on the print button to print the nozzle check.
- Step 5: Now check the nozzle check pattern and see if there are any missing lines.
- Step 6: Then print out a second nozzle check to determine if the printhead requires cleaning.
Method 2- Printhead Cleaning Cycle
The steps to follow in this method are:
- Step 1: First, remove the power cable and its vital.
- Step 2: Then place a folded paper towel right down along the track.
- Step 3: Slide your print head right over the paper towel to clean it.
- Step 4: Then, with the help of a screwdriver, remove the top cover of the printer head.
- Step 5: Slowly lift the ink cartridges and put them off the side.
- Step 6: Make sure not to unhook any of them.
- Step 7: Now, take the syringe with the cleaning solution tip right over the nozzle and gently push the cleaning solution through it.
- Step 8: Make sure to adjust the paper towel at the base to avoid mess.
- Step 9: Repeat the process with the other nozzles.
- Step 10: Once you are done.
- Step 11: Reinstall the ink cartridges back to their original position.
- Step 12: Now proceed to the following method.
Method 3- Run Power Cleaning
The steps to follow in this method are:
- Step 1: Turn off the printer.
- Step 2: Press and hold the power and help buttons at the same time until you see the power cleaning screen.
- Step 3: When does the screen display run power cleaning? Confirm all ink tanks are at least a third full’; click OK to proceed.
- Step 4: Now, the power cleaning process will begin. Do not turn off the printer during the process.
- Step 5: When the power cleaning process is complete, your printer will display a message; press OK to confirm.
- Step 6: To determine whether the issue is resolved, print a nozzle check pattern.
Still, facing the Epson ET-2760 not printing color issue? Or is your printer showing any other Error now? Reach out to printer experts at Printer Tales at the provided numbers: US +1-877-468-0297 / UK +44-800-54-81 50 to have a smooth operating printer.
