How to Fix Epson ET-3760 Not Printing Color?

Epson ET-3760 is a first-rate printer that you can get for optimal printing performance. Like any other printer, Epson may also encounter technical glitches that are very common. Is your EPSON ET-3760 not printing color? Need help in resolving this issue? Here is what you should know.

The issue of Epson ET-3760 not printing color can arise if your full Epson driver set is not installed. It can happen when you allow the Windows install or use the default drivers.

Want to resolve the issue? Continue reading to know how to fix Epson ET-3760, not printing color.

Reason For Epson ET-3760 Color Printing Failure

As we have already mentioned, there can be technical issues in your Epson printers that may cause problems like color printing failure. The other reasons for this problem can be:

Dust Accumulation

Dust accumulation in your Epson ET-3760 can be one of the reasons your printer is not printing color. So, it would be good that you regularly do the cleaning and dusting of your printer.

Blocked Nozzles

There are times when you run over 3 cycles of print cleaning at one time. This may lead to ink accumulation within the nozzles.

Dried Ink Accumulation

Dried ink accumulation in the ink cartridge is another cause for your Epson printer not printing color. Sometimes, clearing up the cartridge that is full of dried ink turns out to be a hard task. The specific printer model may be the reason for that.

Not Using The Printer Regularly

By using the printing machine on a regular basis, you can prevent the clogging problem. If you are not using your printer regularly, there may be higher chances of dust build-up and negative air pressure.

The Printer Is On All The Time

Leaving the printer always turned on is the habit of lots of users. However, it can negatively impact the printer, as it won't get a chance to operate a cleaning cycle. So, always turn the printer off when not in use.

What Are The Ways To Resolve The Epson ET-3760 Not Printing Color Issue?

Here are 2 methods to fix the Epson ET-3760 not printing color issue. Follow every step carefully:

Method 1: Print Nozzle Check & Perform Print Head Cleaning

• Step 1: Go to the home screen of the printer, select Maintenance, and press the OK button. 
• Step 2: Now, select the "Print Head Nozzle Check" option and hit the OK button.
• Step 3: Press OK to proceed with the Print Head Nozzle Check.
• Step 4: Glance at the printed page and check out the broken lines. After that, press OK.
• Step 5: Press the "down" arrow button to select the "Print Head Cleaning" option and then press OK.
• Step 6: Hit the OK button to get started with the Print Head Cleaning process.
• Step 7: The cleaning process will take around 3 minutes, and you must not turn off your printer while the process is ongoing.
• Step 8: Once done, select check and press OK.
• Step 9: Press OK again to proceed to print the Nozzle Check Pattern.
• Step 10: Check the printed pattern. If the problem is still not resolved, try out method 2.

Method 2: Clean The Print Head Manually 

• Step 1: From the printer's home screen, go to Maintenance and press OK.
• Step 2: Select Print Head Nozzle Check and press OK
• Step 3: Then, press OK to proceed with the Print Head Nozzle Check.
• Step 4: When you hear the print head moving, unplug the power cable from the printer. 
• Step 5: Open the printer cover and slide the print head to the slide.
• Step 6: Take out the paper that was supposed to print the nozzle pattern.
• Step 7: Take a disposable paper towel, fold it, and place it under the print head.
• Step 8: Place the print head over the paper towel.
• Step 9: Unscrew the screws and remove the top cover of the print head.
• Step 10: Next, remove the default cartridges and set them aside.
• Step 11: Get a syringe and print head cleaning solution.
• Step 12: Insert the silicon tubing over the nozzle and gently push the cleaning solution to clean.
• Step 13: Repeat the process on every nozzle with the issue.
• Step 14: Adjust the paper towel as needed during the process
• Step 15: Once done, place the default cartridges back into their original position.
• Step 16: Place the top cover and screw it in place. 
• Step 17: Remove the paper towel, then clean and wipe everything down.
• Step 18: Plug the power cable back into.
• Step 19: Then press the Power and Question mark buttons at the same time to perform power cleaning.
• Step 20: When the screen turns back on, select Yes and press OK to run power cleaning.
• Step 21: The power cleaning process will take about 7 minutes. 
• Step 22: When the power cleaning process is complete, press OK.
• Step 23: Now, print another Nozzle Check pattern and see whether the issue is resolved.

If your printer is still facing any problems, you can contact experts at Printer Tales. Call us at US +1-877-468-0297 / UK +44-800-54-81 50. Our experts are available to help you 24/7.