How to Reset Lexmark Printer to Factory Settings?

Are you looking for different ways to reset the Lexmark printer? If yes, go through the methods listed in this guide. 
 

Resetting a printer is one of the best troubleshooting ideas. It will delete all the restored settings and return to a new one. In addition, it will help you resolve random LED flashing. However, you must know that the options might differ depending on the Lexmark models. Let’s check out instructions from the factory to Service Menu and NVRAM reset. 

How to Reset Color Laser Printer to Factory Settings?

You can easily get rid of error codes or messages using the process mentioned below.
 

• Go to the operator panel and press the Menu button.
• Keep going until the Utilities Menu shows on display.
• Then, you need to tap on Select.
• In the next step, you will enter the Menu.
• Click on Menu until Factory Defaults show on display.
• Tap the Select button after that.
• Now, you will see “=Restore” on display.
• Choose Select one more time.
• It will change the settings of the printer to the original factory settings.

If you are using a laser printer, you can perform the method listed above.

How to Reset Soft/ NVRM Settings on Lexmark Printer?

On your Lexmark model, once you have performed the factory reset method, you will need to restore the settings. Here is how you can do that.

• Power off the printer and remove all the cables/ networks.
• While you have turned it off, you need to press: Menu, Go, and Select buttons.
• Keep holding them and power on the device.
• Once the Restoring Factory Defaults display, release them.
• Then, allow the device to warm up as usual.
• Once you have performed the steps, it will clear the NVRAM.
• Also, it will restore the factory default. 

Note: The above steps will not help to reset the network card settings. 

How to Reset/ Restore Factory Default Settings?

You can reset the factory default setting if dealing with print problems. It will help you fix general issues such as an offline printer, interrupted networks, and others. Below are the two methods to reset the printer.

Method 1: Restore the Settings

• On your device, go to the Control Panel.
• Then, click on the Settings icon.
• Thereafter, you need to navigate to the Device section.
• In the next step, tap the OK button.
• Now, find the Restore Factory Defaults option.
• After that, you have to tap on OK.
• Then, navigate to Restore Settings.
• Click on the OK option again.
• Choose Restore All Settings after that.
• Then, press the OK icon.
• To begin the restoration process:
      a. Go to Restore and click on OK.
      b. Then, tap Start and press OK.

Method 2: Delete Printer Memory

You can use this method to remove individual, device, network, security settings, and submerged solutions. 

• On your device, go to the Control Panel.
• Then, navigate to the Settings icon.
• After that, go to the Device folder.
• Now, click the OK icon.
• In the next step, tap on Maintenance.
• Again, you will need to press OK.
• Now, click the Out of Service Erase option.
• Tap on the OK icon after that.

Read Also:- How to Troubleshoot Lexmark Printer Offline (Windows/Mac)?

• Thereafter, choose “Sanitize all information on nonvolatile memory.”
• And click the OK button in the next step.
• To get started with the print job, choose Continue.
• Then, you need to press OK.
• Complete the process following the prompts on display.

Both methods will guide you to fixing common issues and restoring the settings.

How to Reset General Settings to Restore Factory Default?

If your device is denying to connect to the network or showing errors, you can try to reset the general settings. Below are the instructions to do so.

• As the initial step, go to the home screen.
• Then, you need to open the Menu.
• After that, choose the Settings option.
• In the next step, click the OK button.
• Now, you will need to choose General Settings.
• Thereafter, you will need to tap the OK button.
• Choose the Factory Defaults option after that.
• Click on OK in the next step.
• Then, choose the Restore Now option.
• In the end, simply click on OK.

These are the steps that can help you fix the common issues within a few steps.

How to Reset Network/ Fax/ App Settings Remotely?

There are several factors that require it to be reset in order to upkeep the printer. If you are facing an issue with your device’s network or while using an app or fax, do the following.

• Go to the manufacturer's Web Page.
• Then, log in as Administrator.
• Now, you need to tap on Device.
• Thereafter, select Restore Factory Defaults option.
• In the next step, tap Restore All Settings.
• After that, click the Start button.
• Again, press the Start option.
• At last, set the date and time.

It will restore all settings (fax, network, and apps) to the default one. Also, all non-standard apps will be deleted after this procedure. 

How to Reset Lexmark Printer to Fix Random Blinking?

You can fix the random blinking LEDs issue by resetting the printer directly. It will allow the device to cool down and execute the print jobs without issues.

• In the first button, go to the Cancel button.
• Then, you need to press it.
• Hold the button for at least 5 to 10 seconds.
• Next, you can let them go.
• Now, it will automatically lead to the printer reset.
• The LEDs will start to blink now.
• After that, your printing device will reboot.
• Once your device has performed all of these, it will reset to default. 

Now, you know how to reset the various settings of your printing device without getting confused between procedures. If you are still bothered about resetting your Lexmark printer, contact our printer experts. At Printer Tales, we offer easy and quick fixes to all printer-related problems. You can drop your questions at info@printertales.com or call us at +1-877-469-0297/ +44-800-054-8150. We are available 24/7 to offer you assistance.